Experiments with BTBee

From RoboWiki
Jump to: navigation, search

This page is dedicated to our experiments with Bluetooth Bee - a BT virtual serial port device.

First experiment:

ATmega16L on a breadboard with one status LED talking to a PC with USB BT dongle: beecommtest.zip

Both chips powered with 3.3V, Rx,Tx,GND interconnected with AVR, CTS of BTBee grounded.

BT Bee starts double-flashing green after power on, when set to slave mode, it starts alternate flashing red-green, when connected, single-flash green, finally after disconnect double-flash green again.

Test setup on breadboard