Robolution Example Project
Author(s): Costin Ionita, Aija Rusina
Activity: R.U.R. - Summer School 2010
Hardware Design: Our robot consists of a basic Boe-Bot to which we have attached a set of 3 IR sensors: 1-left, 1-center, 1-right.
Software Design: There is a main loop on which the robot analises its current state and tries to move on the direction of the line (Line Follower). The state is coded with three variables: qtiRight, qtiCenter and qtiLeft. 0 - white (robot doesn't sense anything), 1 - black (robot senses the line). There are three main cases. In case all three sensors "feel" 0, it means that the line is over or the curve is too steep. If the curve is too steep, the robot remembers the last change of direction and it tries to search to line in the same direction, otherwise it tries the opposite. If it's the end of the road, the robot uses a simple heuristic to find another line within a certain radius. It moves forward and serches both left and right. In no line is found it repeats this process for a number of times (2 in this case). After 2 steps, if no line is found the robot simply stops.
Go back to the List of the projects